The notches on the shoulder seam (front and back panel) do not match. They are offset by about an inch. Don't ask me how I did this one! All I can think of is that I moved the notch on one seam and forgot to do it on the other. The seam is very short, so you don't really need a notch, just ignore it and you will do just fine.

This correction is for the nursing top that you wear under the jumper. On the three smaller sizes you need to lower the very top of the nursing opening about 1" so that it isn't so close to the neckline of the jumper. If in doubt, try on your top and the jumper before you cut the opening and make necessary adjustments. Don't lower it too much or it will be difficult to nurse easily, but you want it low enough so that it won't show. Thanks for your patience.

Back to Main 208 Page